Waveboard Panel

This is what I've been busy with lately...

Solid Nyato timber door panel.

How to Tell Me What You Wanna Cut

CNC Cutting Service is new to local customer. In almost all cases, guiding the customers to provide information to fulfil his/her needs is a must.

Obviously, saying "YOU DESIGN, I CUT" is not even close to enough information...

Similarly, "I want a cabinet", "I want a chassis", "I want a box" are not specific enough too...

In this article, I will go through what I find helpful to a meaningful transaction.

All I really need is a clear idea of what you are after.

These tips may seem pretty basic but they can save you time, and money.

• Send something in writing:  Email, or Letter is fine, or just Email an image.

• Don't spend to much time on plans to start with, a quick sketch or photo of what you are really after plus if needed a chat on the phone will cover most thing.

• It's better to get a rough sketch to us sooner than a fine drawing later.

• If you want simple shapes like circles, rectangles, triangles or quadrants, a simple list with radius or diameter and the thickness plus quantities.

• In a perfect world we like longer lists on an excel sheet with each dimension in a separate cell. If you don't know what I'm on about ignore this.

• prefer sizes in millimeters but if you happier with inches or centimeters please state which. We just need to understand what you want. 

• If you can send a CAD drawings or vectored files please do.

• If possible put all parts, and instructions on a single file.

• If your not a CAD person don't worry we can still read Bits of paper,  Word Doc's, PDF's, JPGS, Spreadsheets, etc. 

• 
  

Tips to sending CAD files for CNC routing machining

• Importing from Apple Mac vectorworks can still cause problems but it is very rare

• It's always a good idea to also send a PDF file so we can check against the CAD file, which can sometimes be corrupted when converting to our CAD/CAM software.

• Intersecting curves, and lines need to connect.

• Lines on top of each other can cause problems.

• We can sort these things out but if their are a lot of curves or shapes it can be very time consuming.

• Scale should be 1 - 1 full size. Not vital but a good idea.

• We machine from files in millimetres so millimetres are preferred.

• Polylines with thicknesses should be set to thickness zero.

2D Files

• All the parts on a single of CAD file grouped in material, and thicknesses.

• If we have 20 or 30 individual files to handle it's harder to get an over view for quoting, and key file can be missed.

• Notes, and details on the file are very useful. Files can be loaded on different computers stations, and emails, and note become separated.

• Using layers for groove depths board thicknesses different hole sizes an be very useful.

• Early version of DXF, and DWG are can be more reliable than the latest version.

• When we transfer data via DXF we will use version 13 or 2000 if possible.

• We find DWG slightly more stable than DXF.

• If you have a 3D model it is always useful for getting an over view.

• It can take time to convert a 3D file into a 2D file so send the 2D file as well.

3D Files

• We Machine with V-Carve Pro & AutoCad for preparation

• We can take most 3D Solid and Surface files.

• Mesh files like STL can loose definition when the parts are large.

• An indication of the block size is always useful.

Tips for Adobe Illistrator users sending files for CNC Routing.

• If you can send the file as PDF as well it can be a great help.

• Files can sometimes change when tranfered to other programs. PDF's give us a visual double check.

• It's a good idea to put scale reference like a 500mm square with a dimension on the file with free flowing shapes. Some time's the scale will change when changing from Illustrator to CAD.

• We can import Adode Illustrator so machining directly from your files is possible.

• If you want text machined explode the fonts to turn them in to graphics. If you send text as fonts, and we don't have your font a different one will be substituted, and your elegant font can come out as Helvetica. Again a PDF can give us a quick double check.

• Send the your file as an Adobe Illustrator file not as a DXF.

If you use Illustrator to convert to DXF curves can be broken into small steps that take up a lot of space, and lose accuracy.

Examples of files for CNC routing

• We like all the information on a single file.

• Some times the file becomes separated from the Email.

• From starting to writing the CNC machining program takes just a few minutes.

• This saves time, helps prevent error's, and keeps setup cost to a minimum.

This example shows material, holes numbers with detail, and a couple of dimensions.

This job was more complex but the principle is the same.

CAD drawing of parts for a 10 metre boardroom table

We grouped the different thicknesses of MDF in to boxes.
The 12mm MDF (bottom left) was used a templates for the veneer.
The narrow strips are templates for the Hardwood edging. (top centre 25mm box)
25mm parts are machined upside down with work top key hole cut outs.
This may seem a bit chaotic


I sincerely hope that the above information is helpful to you like they are useful to me.

Any comments are welcome. Please feel free to comment. Need your comment to horn my communication skill.

Pleas Please Please!

Ciao

Digital Wood Joinery Lesson No.3

Finger join is another of my favourite. Practical & aesthetically pleasing to my eye.

Picture tells a thousand word... let the pix talk...

##PS,
I would love to post phot of this but I have yet figure out the way to make onject float in mid air...

Digital Wood Joinery Lesson No.2

The 3D illustration isn't as clear to some readers as I wish they are so here is a 2D figure with a few more varieties of tong & grooves which I like to employ in my designs.

The Magenta vertical blocks are the various varieties of Tong (male) & the bottom horizontal Cyan are the Grooves (female).
the 1st & 2nd on the left is the simplest form which are my favourite.
the the 3rd requires turning the job to cut  both sides of the tong hence I rarely use it.
The 4th, 5th & 6th  are great when I want to show off how my stuff snaps on perfectly... :D
The grooves are usually half the wood thickness & the narrower tong of the 5th, 6th & 7th are normally half the plank thickness too.
With CNC precision & cut quality, I usually design the tong to fit the grooves exactly, no need for small clearance/allowance for adjustment during assembly like traditional carpenters do.

These Tong & Groove Joints are self-reference, holding themself up when assembled & you don't need set sqare to square them up or clamps to hold them on. A few tander knock will persuase them to mate up nicely.

Digital Wood Joinery Lesson No.1

Wood joinery is a priced craft.

Traditionally, any carpenter will feel insulted if you say he nail up his work...

 Deep inside, I too feel humiliated without implementing some sort of wood joints in my personal projects.

The RED & Blue are simple butt joints... I don't feel proud when I use them....

The Magenta & Cyan are tong & groove some call it tenon & mortise... this is the least I'll have in my personal projects.

Another modern woodworker's must have is PVA glue, commonly called wood glue or white glue. It is a water based glue that will not break before the wood fiber tears... great for indoor use.

A properly glued  joint will take all the abuse you can throw at it before the wood itself give way...

SAY NO TO NAILS!